02 9604 0066 185 Warren Road, Smithfield NSW 2164 Make an enquiry

Technical data

Tested, by the numbers.

How the PVC-DOT mount works, the EN ISO 10545 test results for our glass mosaic, and the sheet sizes you need to work out quantities.

PVC-DOT perfect joint

Why the mount matters.

Small PVC dots join the tiles at their corners. The dispensing shape is consistent and 93% of the tile back stays available for adhesion, meeting Australian Standard AS 3958.1-2007.

  • Back of a mosaic sheet showing evenly placed PVC dots
    Even dispensingPVC dots are placed the same way on every sheet, for a more perfect and regular layout than other dot-mounted sheets.
  • Close-ups comparing a consistent PVC dot (image 1) with an irregular dot (image 2)
    Consistent dot shapeOur dots (image 1) keep a consistent shape, so 93% of the tile back stays available for adhesion.
  • Side views of two mosaic samples showing where the PVC dots sit (images 3 and 4)
    2.5 mm below the surfaceEach PVC dot sits 2.5 mm below the tile face (image 3), so the adhesive covers it completely for a clean finish.
  • Pairs of tiles comparing joint width (images 5 and 6)
    More room for groutThe spaces between our tiles (image 5) are slightly wider and straighter than an imitation sample (image 6), leaving more room for grout.

Test report

Passes every test.

Results from the test report in our catalogue, against the requirements of the EN ISO 10545 series of ceramic tile tests.

Class 5 is the highest stain-resistance class. GA is the highest class for resistance to household chemicals and swimming pool salts.

Glass mosaic test report
PropertyMethodRequirementResult
Physical properties
Water absorption (percent mass fraction)EN ISO 10545-3Average 0.5% or less, individual 0.6% maximum0.05% (individual 0.03 to 0.07%)
Thermal shock resistanceEN ISO 10545-9PassFully resistant
Crazing resistance, glazed tilesEN ISO 10545-11PassFully resistant
Frost resistanceEN ISO 10545-12PassFully resistant
Reaction to fireCWT (classified without testing)Class A1 or A1flWalls A1, floors A1fl
Resistance to staining
Green staining agent in light oilEN ISO 10545-14Minimum class 3Class 5
Red staining agent in light oilEN ISO 10545-14Minimum class 3Class 5
Solution in alcoholEN ISO 10545-14Minimum class 3Class 5
Olive oilEN ISO 10545-14Minimum class 3Class 5
Resistance to household chemicals and swimming pool salts
Household chemicals: ammonium chloride 100 g/LEN ISO 10545-13Minimum class BClass GA
Pool salts: sodium hypochlorite 20 mg/LEN ISO 10545-13Minimum class BClass GA

Tile sheet information

Sheets, boxes and coverage.

Standard sheet formats by tile size. Some colours use other sheet formats, so please confirm the sheet size when ordering.

Standard sheet formats
TileSheetTiles per sheetSheets per m²m² per box
25 x 25 mm312 x 312 mm14410.281.95
25 x 25 mm317 x 317 mm144102
36 x 36 mm330 x 330 mm819.182.18
50 x 50 mm315 x 315 mm3610.081.98

Get in touch

Visit or call us.

Address

185 Warren Road
Smithfield NSW 2164

Get directions
Phone 02 9604 0066

Fax 02 9604 0022

Send a message